GE Fanuc IC200CHS001

Feimu Technology has a variety of original equipment inventories, which can not only meet the equipment matching for your new projects, but also meet the replacement needs for your old equipment.

The GE Fanuc IC200CHS001 is a barrier-type I/O carrier base of the VersaMax PLC series. It is an indispensable component for building a reliable and flexible VersaMax I/O substation. It does not have its own I/O circuits. Its function is to carry one standard VersaMax plug-in I/O module, provide on-site wiring terminals, backplane bus power supply and communication, and serve as the wiring base for remote/local I/O sites. If you need this product, you can contactFeimu Technology at any time. We have the product in stock and can provide it to you.

Characteristics

The GE Fanuc IC200CHS001 itself does not have I/O processing circuits. It is designed to accommodate a single standard IO module and belongs to the VersaMax barrier-isolated I/O terminal base. It is compatible with most VersaMax single-slot IO modules. It has industrial wide-temperature operation, excellent voltage resistance performance, and safety certification. The terminal arrangement is neat and convenient for maintenance.

It is suitable for local and remote distributed IO sites. It is equipped with 36 screw terminals with physical barriers, and has a transparent and removable dust cover. The current-carrying specifications of the signal terminals and common terminals are different. The rear panel interface realizes bus communication and power supply, and the module is fixed by a snap-fit.

It supports both DIN rail and panel installation methods, and an expansion terminal strip can also be added. Compared with the spring terminal base, it has better shock resistance and better wiring space than the compact base.

Parameters

Characteristics

The GE Fanuc IC200CHS001 base unit does not come with its own circuit board or channel status indicator lights. The I/O operation status is displayed by the modules installed on it. The terminal layout is neat, facilitating line inspection, fault repair, and changes to terminal positions. It can be installed in the control cabinet to serve as a local I/O base unit, or it can be used to form a field distributed remote IO substation, suitable for most small and medium-sized automation equipment.

Application fields

As a VersaMax PLC barrier-type I/O mounting base, the GE Fanuc IC200CHS001 can be equipped with digital, analog, relay, and temperature measurement I/O modules to form local racks and remote distributed IO substations. With the shock-resistant barrier screw terminals, it is widely used in injection molding machinery, packaging lines, machine tools, water treatment facilities, power monitoring, automotive fixtures, warehousing sorting, printing, pump stations, HVAC equipment, rubber machinery, and other various small and medium-sized industrial automation equipment. It is compatible with all VersaMax control systems that require on-site wiring, decentralized data collection, and signal output.

FAQ

Q1: What types of I/O signals does this module support?

This carrier module supports digital input and digital output modules, which are suitable for scenarios requiring switch quantity signal control.

Q2: Can additional terminal blocks be added for IC200CHS001?OK. The auxiliary input/output terminals can be directly inserted into the recess at the lower edge of the carrier module to provide additional on-site wiring connections.

Q3:How to perform fault diagnosis on the system?

The VersaMax system usually supports diagnosis through programming software. One can check the LED status of the I/O module or view specific fault information through the software.

Q4:What is the maximum wire diameter supported by the terminal blocks? What are the requirements?

The 36 barrier-type terminals of GE Fanuc IC200CHS001 support stranded or solid copper wires with a diameter ranging from AWG 22 to AWG 14. GE recommends using copper wires with a rated temperature of 90°C. If two wires are connected to a single terminal, their types and sizes must be the same.

Q5: Will on-site electromagnetic interference affect the module? How can it be avoided?

Yes. On-site electromagnetic interference is a common factor affecting the reliability of PLC control systems. It is recommended to keep the module at a distance of≥20cm from power equipment (such as transformers, frequency converters), and separate the power lines and signal lines for wiring. At the same time, ensure good grounding, with the grounding resistance should be≤4Ω.

Our advantages

Feimu Technology has always been committed to providing customers with a pleasant shopping experience. We have partnerships with multiple logistics companies, ensuring that you can receive the products quickly no matter where you are. We have a rich inventory of PLC, DCS, industrial control modules and related equipment. At the same time, we have a complete set of professional and comprehensive inspection procedures to guarantee that our products are in excellent condition and intact.

Contact Information

Email: sales@feimutech.com

WhatsApp: +86 13358323579

Website: www.feimuplc.com

Response time: Within 24 hours. Technical questions typically answered within 12 hours.