Feimu Technology Company has specially prepared a very "practical" basic component for overseas electrical engineers and equipment maintenance teams in the field of motor control - the Siemens 3RW3027-1BB14 soft starter. As everyone knows in the field of equipment management on-site, if a high-power motor is directly started, the current can surge to seven or eight times the rated current.
This not only causes the grid voltage to fluctuate wildly, but also easily damages the motor shaft or coupling. As a professional supplier, we recommend this equipment specifically designed to solve the problem of "violent start" of motors to you, in order to enable your motors to start and stop "gently", and completely get rid of the troubles caused by start-up shock such as tripping and equipment wear.
This soft starter is used in an extremely wide range of applications. The most common ones include pump control in building water supply systems, startup of HVAC air conditioners, as well as small conveyors and compressors.
For any scenarios where high-precision speed regulation is not required but where limiting the starting current and reducing mechanical shock are necessary, this 3RW3027-1BB14 is definitely the main force. It is the "vanguard" of motor protection and control, ensuring the smooth operation of the equipment.
|
Product Model |
Siemens 3RW3027-1BB14 |
|
Product Series |
SIRIUS Soft Starter |
|
Frame Size |
S00 (Compact Type) |
|
Rated Operating Voltage |
200V - 480V AC (Three-phase) |
|
Rated Operating Current |
7A (at 40°C Ambient Temperature) |
|
Motor Power |
3 kW (at 400V) |
|
Control Voltage |
24V DC |
|
Starting Mode |
Soft Start / Soft Stop |
|
Auxiliary Contacts |
1 NO + 1 NC |
The greatest advantage of our Siemens 3RW3027-1BB14 model is "authenticity" and "fresh condition". Our supply channels here are all very legitimate. Each piece of equipment has undergone strict screening. We will clean the casing thoroughly and check whether the terminals are original and undamaged. It makes you look clean and professional when you get it, and it fits neatly in the cabinet, and you don't have to worry about buying refurbished parts or fake goods that cause motor control failure.
Every Siemens 3RW3027-1BB14 soft starter shipped from Feimu Technology meets the following criteria.
Selecting the correct soft starter prevents nuisance tripping and premature failure. Use this table to verify the 3RW3027-1BB14 fits your application.
| Parameter | Value | Verification Method |
|---|---|---|
| Motor power at 400V | 3 kW | Check motor nameplate |
| Rated current | 7A at 40°C | Compare with motor FLA |
| Supply voltage | 200V - 480V AC | Measure line voltage |
| Control voltage | 24V DC | Verify power supply output |
| Frame size | S00 | Measure panel mounting space |
Common mismatches to avoid:
Sizing example: A customer has a 4 kW motor at 400V. The nameplate shows FLA of 8.5A. The 3RW3027-1BB14 is not suitable. Recommend upgrading to the next frame size (S0, 12A model). Contact us for the correct alternative.
When Siemens 3RW3027-1BB14 does not operate as expected, use this guide before replacing the unit.
| Symptom | Likely Cause | Corrective Action |
|---|---|---|
| Motor does not start, no LED | Control voltage missing | Check 24V DC supply polarity and voltage level |
| Motor starts but trips immediately | Overload setting too low | Increase current setting to match motor FLA |
| Motor starts at full torque, no ramp | Soft starter bypassed by external circuit | Check wiring between start signal and soft starter input |
| Unit shows red LED after start command | Phase loss or thyristor fault | Verify all three phases at input terminals |
| Motor stops abruptly instead of soft stop | Soft stop mode not enabled | Configure P03 parameter to enable soft stop |
| Unit overheats during normal operation | Dust accumulation on heat sink | Clean cooling fins with compressed air |
If the above steps do not resolve the issue, record the LED flash pattern (number of flashes, pause duration). Send the video or description to our technical team. We respond within 24 hours with a repair or replacement decision.
The 3RW3027-1BB14 fits specific applications. Use this table to confirm it matches your equipment.
| Application | Suitability | Why |
|---|---|---|
| Centrifugal pump up to 3kW | Excellent | Soft stop prevents water hammer |
| Small conveyor belt | Excellent | Reduces mechanical stress on gearbox |
| Fan or blower | Good | Limits inrush current during start |
| Compressor with unload valve | Good | Reduces belt wear |
| High inertia flywheel or press | Not suitable | Requires longer ramp time than S00 frame provides |
| Crusher or mixer | Not suitable | Starting torque insufficient for loaded start |
Alternative recommendation for unsuitable applications: If your application requires higher starting torque or longer ramp time, consider the 3RW30 series in S0 or S2 frame size. Provide your motor power, load type, and desired start time. We will calculate the correct model for you within one business day.
Feimu Technology maintains documented processes for inventory management, testing, and shipping. The following standards apply to every Siemens 3RW3027-1BB14 order.
| Standard | Specification |
|---|---|
| Inventory location | Jiangmen City, Guangdong, China |
| Warehouse type | Temperature controlled, ESD protected |
| Stock accuracy | 99.5% real-time inventory match |
| Order cut-off time | 3:00 PM China Standard Time |
| Same day shipping eligibility | Orders paid before cut-off time |
| Standard international carrier | DHL, FedEx, UPS (customer selects) |
| Transit time to major markets | USA 5-7 days, EU 4-6 days, Asia 3-5 days |
| Tracking provided | Within 12 hours of shipment |
| Packaging standard | ISTA 3A certified for shock and vibration |
Volume order lead time:
Address
No. 26, Yuhu Street, Encheng Subdistrict, Enping City, Jiangmen City, Guangdong Province, China
Tel
